QNAP1 RAIL-B02, RAIL KIT FOR TVS-471U AND 2U MODELS | RAIL-B02

QNAP Rail Kits assist in the installation of rackmount QNAP NAS. The sliding rails make it easier to slide QNAP NAS in and out for easy maintenance and management. QNAP NAS rackmount models comply with ANSI/EIA-RS-310-D rack mounting standards. Before purchasing server racks, please make sure the server racks conform to the matching specifications.

1. Rack size
A. Mounting post width: ≥ 17.8′ / 451 mm
B. Panel width: ≥ 19.1′ / 485 mm
C. Mounting post depth: 18′ ~ 32′ / 443 ~ 815 mm
D. The distance between two rack posts (center-to-center measurement of the rack’s square holes) is 18.3′ / 465 mm

The rack kits are only compatible with 9.5 mm x 9.5 mm square-hole server racks.

Product Last Updated: 11/12/2025

* Whilst we endevour to have the correct information on our products provided from the supplier/manufacturer errors do occur. If you would like to double check the information, please feel free to contact us and we will be more than happy to confirm information on the item prior to purchase. In the event that product information is incorrect due to information we received from our supplier or manufacturer, we do not take responsibility or be held liable for damage(s) or loss(s). We will work with you and do our best to make the best of a bad situation and work with our supplier(s) and/or manufacturer(s) to supply the correct information for the item purchased etc..