APC Back-UPS 1600VA/900W Line Interactive UPS, Tower, 230V/10A Input, 4x Aus Outlets, Lead Acid Battery | BX1600MI-AZ

APC Back-UPS 1600VA, 230V, AVR, 4 Australian outlets

Main Input Voltage 230 V
Main Output Voltage 230 V
Rated power in W 900 W
Rated power in VA 1600 VA
Output connection type 4 Australian
Cable length 1.22 m
Number of cables 1
Battery type Lead-acid battery
Network frequency 50/60 Hz +/- 5 Hz auto-sensing
Input voltage limits 140…300 V
Input Power Factor at Full Load 0.56
Maximum configurable power in W
900 W
Output frequency
50/60 Hz +/- 1 Hz sync to mains
UPS type Line interactive
Wave type Stepped approximation to a sinewave
Full load runtime 00:01:00 900 W
Half load runtime 00:06:30 450 W
Maximum configurable power in VA 1600 VA
Transfer time 6 ms typical : 10 ms maximum
Ambient air temperature for operation 0…40 °C
Relative humidity 0…95 % non-condensing
Operating altitude 0…3000 m
Ambient air temperature for storage -15…40 °C
Storage Relative Humidity 0…95 % non-condensing
Storage altitude 0…3000 m
Acoustic level 40 dBA
IP degree of protection IP20

Mounting mode- Not rack mountable
Replacement Battery -APCRBC176

Product Last Updated: 11/12/2025

* Whilst we endevour to have the correct information on our products provided from the supplier/manufacturer errors do occur. If you would like to double check the information, please feel free to contact us and we will be more than happy to confirm information on the item prior to purchase. In the event that product information is incorrect due to information we received from our supplier or manufacturer, we do not take responsibility or be held liable for damage(s) or loss(s). We will work with you and do our best to make the best of a bad situation and work with our supplier(s) and/or manufacturer(s) to supply the correct information for the item purchased etc..