Seagate 8TB 3.5′ IronWolf, SATA 6.0Gb/s, NAS 24×7, CMR, max. STR OD 202MB/s, 5400 RPM, 256MB Cache, HDD, 3Years Warranty (ST8000VN002) | ST8000VN002

Seagate 8TB 3.5′ IronWolf, SATA 6.0Gb/s, CMR, max. STR OD 202MB/s, 5400 RPM, 256MB Cache, HDD (ST8000VN002)

IronWolf™ is designed for consumer and commercial NAS. Delivering Tough, Ready and Scalable 24×7 performance in multibay, networked environments.

SPECIFICATION
Capacity 8TB
Standard Model Number ST8000VN002
Interface SATA 6Gb/s

Features and Performance
Drive Bays Supported 1 – 8 Bays
Recording Technology CMR
Drive Design (Air or Helium) Air
Workload Rate Limit (WRL) 180
Rotational Vibration (RV) Sensor Yes
Dual-Plane Balance Yes
Error Recovery Control Yes
Max. Sustained Transfer Rate OD (MB/s) 202MB/s
Spindle Speed (RPM) 5,400
Cache (MB) 256

Reliability

Load/Unload Cycles 600,000
Non-recoverable Read Errors Rate, Max 1 per 10E14
Power-on Hours 8,760
Mean Time Between Failures (MTBF, hours) 1,000,000
Rescue Data Recovery Services (years)4 3
Warranty, Limited (years) 3

Power Management
Startup Current, Typical (12V, A) 1.8
Average Operating Power 5.3
Idle Power Average (W) 4 W
Standby Mode/Sleep Mode, Typical (W) 0.25/0.25
Voltage Tolerance, Inc. Noise (5V / 12V) ±5% / ±10%

Environmental/Temperature
Operating Temperature (ambient, min °C) 0
Operating Temperature (drive reported, max °C)5 65
Nonoperating Temperature (ambient, min / max °C) -40 / 70

Environmental/Shock
Shock, Operating/Non-operating: 2 ms (max) 80 Gs/300 Gs

Environmental/Acoustics
Acoustics, Idle (typical, measured in Idle 1 state) (dBA) 25
Acoustics, Seek (typical) (dBA) 26

Physical

Height (mm/in) 26. 11 mm/1.028 in
Width (mm/in, max) 26.11 mm/1.028 in
Depth (mm/in, max) 146.99 mm/5.787 in
Weight (g/lb, typical) 630 g/1.389 lb
Carton Unit Quantity 20
Cartons per Pallet / Cartons per Layer 40/8

Product Last Updated: 10/04/2026

* Whilst we endevour to have the correct information on our products provided from the supplier/manufacturer errors do occur. If you would like to double check the information, please feel free to contact us and we will be more than happy to confirm information on the item prior to purchase. In the event that product information is incorrect due to information we received from our supplier or manufacturer, we do not take responsibility or be held liable for damage(s) or loss(s). We will work with you and do our best to make the best of a bad situation and work with our supplier(s) and/or manufacturer(s) to supply the correct information for the item purchased etc..