APC Locking Power Cord Kit, C13 to C14 (90 Degree), 1.2M Length, 6 Pack

Power Cord Kit (6 ea). Locking. C13 to C14 (90 Degree). 1.2m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the ‘locking’ feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.
Input Connection Type IEC 60320 C14
Cable length 1.22 m
Number of cables 6
Provided equipment- 3 left-angle jumper cords, 3 right-angle jumper cords
Max line current 10 A
Input current limits 10 A
Max current draw 10 A
Number of power socket outlets 1 IEC 60320 C13
Power cable length 1.22 m
Ambient air temperature for operation 0…70 °C
Relative humidity 20…80 %
Operating altitude 0…10000 ft
Ambient air temperature for storage -25…75 °C
Storage Relative Humidity 20…80 %
Storage altitude 0.00…15240.00 m

Mounting mode- Not rack mountable

Product Last Updated:

* Whilst we endevour to have the correct information on our products provided from the supplier/manufacturer errors do occur. If you would like to double check the information, please feel free to contact us and we will be more than happy to confirm information on the item prior to purchase. In the event that product information is incorrect due to information we received from our supplier or manufacturer, we do not take responsibility or be held liable for damage(s) or loss(s). We will work with you and do our best to make the best of a bad situation and work with our supplier(s) and/or manufacturer(s) to supply the correct information for the item purchased etc..