EPOS | Sennheiser Eu limiter inline adapter ED – RJ 9 (85db avarage for 8 h work day)

Overview

This cable is fitted with an Easy Disconnect (ED) plug at one end, and a RJ 9 at the other. The headset can be connected directly to the phone with no additional bottom cable required. CEUL 32 has an 01 wire configuration.

CEUL 31/32 cables work with wideband headsets too, but please note that the speaker volume is significantly lower compared to when connected with narrowband headsets.
For more information about your phone compatibility with our headsets please go to our Compatibility Guide.

Features

Low noise exposure during the work day – the average incoming audio signal remains below 85 dB throughout an 8-hour working day.

Easy setup – just connect the cable.

Compatible for all SH- and CC-Headsets*

Technical Data

Connector ED to RJ 9 (CSTD 01)
Cable length 70 cm / 27,56 in
Weight 35,4 g

Product Last Updated: 16/03/2024

* Whilst we endevour to have the correct information on our products provided from the supplier/manufacturer errors do occur. If you would like to double check the information, please feel free to contact us and we will be more than happy to confirm information on the item prior to purchase. In the event that product information is incorrect due to information we received from our supplier or manufacturer, we do not take responsibility or be held liable for damage(s) or loss(s). We will work with you and do our best to make the best of a bad situation and work with our supplier(s) and/or manufacturer(s) to supply the correct information for the item purchased etc..